ZH EN
PVC 2T3440 S18 苹果绿 3.0MM
Request Sample
PVC 2T3440 S18 苹果绿 3.0MM

PVC 2T3440 S18 苹果绿 3.0MM

Description

BV/2 EF 10–S18+05 AG 3.0 mm

Article

A010110303B22001

General Characteristics

2层, 绿色PVC双面覆胶，光面上表面，S18钻石纹下表面

Print Data sheet
Request Sample

Technical Information

Max Production Width
118.11 in 3000.00 mm
Total Thickness
0.12 in 3.00 mm
Mass
0.66 lb/ft2 3.20 kg/m2
Tensile force at 1% elongation
After Relaxation - ref. ISO 21181
57.00 lbf/in 10.00 N/mm
Working Temp.
14/+176 F -10/+80 C
Flexion (A)
3.15 in 80.00 mm
AB Belt Schema
Counter Flexion (B)
4.72 in 120.00 mm
Coefficient of friction
Bottom side - Steel
0.40

Special Features

Hydrolysis Resistant
PVC 2T3440 S18 苹果绿 3.0MM PVC 2T3440 S18 苹果绿 3.0MM

Top side (Carrying)

Material
PVC
Color
苹果绿
Thickness
0.02 in 0.50 mm
Hardness
80 Shore A | ISO 868
Surface
光面

Tension member

Interply
PVC
Fabric
柔性聚酯
Plies
2
Weft
柔性型

Bottom side (Pulley)

Material
PVC
Color
苹果绿
Thickness
0.02 in 0.50 mm
Hardness
80 Shore A | ISO 868
Surface
倒金字塔纹
wave horizontal addon

Splice Instructions

6
Preferred method
TRANSLATE TO ZH

Fingers are punched into the ends to be joined, and then tacked together and welded under pressure and heat.
This method is especially suitable for single-layered belts

  • Length of the joint 90mm
  • Length of the fingers 90mm
  • Width of the fingers 10mm

180 C 356 F 180 C 356 F 7.26 PSI 0.5 Bars 2.00 min
180 C 356 F -18 C 0 F 29.03 PSI 2 Bars No
 
Wave horizontal white

Mechanical Fasteners

Recommended Mechanical Fasteners

Search
Staple Lacing

Staple Lacing

Recommendation at belt minimum pulley diameter:
RS62
APF Fasteners

APF Fasteners

Recommendation at belt minimum pulley diameter:
APF-150
Alligator

Alligator

Recommendation at belt minimum pulley diameter:
7
Clipper Lacing

Clipper Lacing

Recommendation at belt minimum pulley diameter:
25 LP, 30P, UX-1 SP, UCM36, 36, 1 SP, UX-1 LLSP, 1 LLSP, 30LP, 36 LL, 36 LLLP, UCM36 LL

Recommended mechanical fastening method

  • Applicable

  • Not Applicable

Recessed Lacing
Recessed Lacing:
Hidden Lacing
Hidden Lacing:
Plastic Spiral Finger
Plastic Spiral Finger:
Plastic Spiral Lacing
Plastic Spiral Lacing:

  • Applicable

  • Not Applicable

wave horizontal addon

Recommended Uses

Recommended use: Slider Bed

Slider Bed

Flat Rollers

Flat Rollers

Slider Beds on Both sides

Slider Beds on Both sides

Channel Trough

Channel Trough

Conventional Trough

Conventional Trough

Incline Conveying

Incline Conveying

Incline Variation

Incline Variation

Bucket Elevator

Bucket Elevator

Conveyor with Accumulation

Conveyor with Accumulation

Bend Conveyor

Bend Conveyor

Knife Edge Conveyor

Knife Edge Conveyor

  • Applicable

  • Limited use

  • Not Applicable

Wave horizontal white

Certifications and Lab Tests

 
wave horizontal addon

Chemical Resistance Information

Category

Chemical

Results

DOWNLOAD FULL CHART
Wave horizontal white

Download INO USA
Lighteight Belt catalog

Download
Lighteight Belt Catalog
light-yellow-curve